Die-cast aluminum case; handle socket cover in nylon; rack, sliders, pinion and cover in zamak; galvanized steel screws; screws for locking cremone bolts on profile in stainless steel.. For tilt and turn sash with top anti-false manoeuvre.

body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. Inter-axes 98 mm. For tilt-and-turn with anti-false manoeuvre on the cremone bolt

Body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. Centre distance 84.5 - 104 mm

Die-cast aluminum case; handle socket cover in nylon; rack, sliders, pinion and cover in zamak; galvanized steel screws; screws for locking cremone bolts on profile in stainless steel. Inter-axes 84,5 - 104mm

Body and handle in die-cast aluminium; rack,pinion, and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. Inter-axes 98 mm

Case and cover in zamak; C40 turned steel wheels; Pins in galvanized steel. Backset deviation 12.5 mm.

Die-cast aluminium handle; body, body cover and rotor made of zamak; anti-friction bushes in delrin, steel pin and screws. Reduced handle, pin projection 89 mm

Die-cast aluminium handle; body, body cover and rotor made of zamak; anti-friction bushes in delrin, steel pin and screws. Reduced handle with Cylinder, pin projection 89 mm

Die-cast aluminium handle; body, body cover, pull tray and rotor made of zamak; anti-friction bushings in delrin, steel pin and screws. Lift handle, 7 mm panel, with external Pull tray. For profile sections up to 64 mm

body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. RH offset handle cremone bolt, 2 sliders with projection 44 mm

Body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. LH offset handle cremone bolt, 2 sliders with projection 24 mm

body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. RH offset handle cremone bolt, 2 sliders with projection 24 mm