Catalogue
Search
Handle, case and cover in zamak; pin, screws and springs in galvanized steel; derlin washers. Reduced handle, thickness 14 mm, projecion square 36 mm.
Handle, case and cover in zamak; pin, screws and springs in galvanized steel; derlin washers. Reduced handle, thickness 14 mm, projecion square 45 mm
Die-cast aluminium handle; body, body cover and rotor made of zamak; galvanized steel spring; anti-friction bushes in delrin. Steel pin and screws. Reduced on both sides.
Die-cast aluminium handle, zamak reduced handle, body, rotor and body cover in zamak, delrin bushings, stainless steel pin and screws. Reduced on both sides.
Case and cover in zamak; C40 turned steel wheels; Pins in galvanized steel. Backset deviation 12.5 mm.
Die-cast aluminium handle; body, body cover and rotor made of zamak; anti-friction bushes in delrin, steel pin and screws. Reduced handle, pin projection 89 mm
Die-cast aluminium handle; body, body cover and rotor made of zamak; anti-friction bushes in delrin, steel pin and screws. Reduced handle with Cylinder, pin projection 89 mm
Die-cast aluminium handle; body, body cover, pull tray and rotor made of zamak; anti-friction bushings in delrin, steel pin and screws. Lift handle, 7 mm panel, with external Pull tray. For profile sections up to 64 mm
body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. RH offset handle cremone bolt, 2 sliders with projection 44 mm
Body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. LH offset handle cremone bolt, 2 sliders with projection 24 mm
body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. RH offset handle cremone bolt, 2 sliders with projection 24 mm
body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. LH offset handle cremone bolt, 1 slider with projection 44 mm
Sections legend
