Die-cast aluminium handle; body, body cover, pull tray and rotor made of zamak; anti-friction bushings in delrin, steel pin and screws. Lift handle, 7 mm panel, with external Pull tray. For profile sections up to 64 mm

body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. RH offset handle cremone bolt, 2 sliders with projection 44 mm

Body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. LH offset handle cremone bolt, 2 sliders with projection 24 mm

body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. RH offset handle cremone bolt, 2 sliders with projection 24 mm

body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. LH offset handle cremone bolt, 1 slider with projection 44 mm

body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. RH offset handle cremone bolt, 1 slider with projection 44 mm

body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. For tilt and turn logic manoeuvre LH-RH opening. Centre dist. 104 mm. Suitable for kit with anti-false manoeuvre top.

body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. For tilt and turn logic manoeuvre, LH-RH opening. Centre dist. 104 mm. Suitable for kit with anti-false manoeuvre on the cremone bolt.

Body and handle in die-cast aluminium; rack, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. For tilt before turn manoeuvre, LH-RH opening. Interaxis dist. 98 mm. Suitable for kit with anti-false manoeuvre on the cremone bolt.

Die-cast aluminium handle; body, body cover, rotor made of zamak; anti-friction bushings in delrin, steel pin and screws. Handle for tilt and slide, 7 mm square, projection 32 mm

Die-cast aluminium handle, nylon cap and washer, zamak bushing, set screw, stainless steel spring and pin, LH version. Adjustable panel projection from 23,5 to 33 mm. To be combined with art. 3630 - 3630.10 - 3631 - 3631.10

Die-cast aluminium handle, nylon cap and washer, zamak bushing, set screw, stainless steel spring and pin. Adjustable panel projection from 23.5 to 33 mm, RH version. To be combined with art. 3630 - 3630.10 - 3631 - 3631.10