Catalogue
Search
Extruded aluminium body; M8 screw and M6 set screw in galvanized steel. H = 16,2 mm
Stainless steel lever, pins, screw and grub screws; Zamak blocks; nylon blocks. For handle-controlled casement opening that can be installed vertically
Die-cast aluminum handle; Rotor, case and cover in zamak; Derlin washer; Spring, grub screw and pin in galvanized steel; screws in stainless steel. For sash width from 40 to 60 mm
Die-cast aluminum handle; Rotor, case and cover in zamak; Derlin washer; Spring, grub screw and pin in galvanized steel; screws in stainless steel. For sash width from 60 to 80 mm
Die-cast aluminum handle; Rotor, case and cover in zamak; Derlin washer; Spring, grub screw and pin in galvanized steel; screws in stainless steel. For sash width max 90 mm
Stainless steel. Fixing kit with threaded inserts M3
Die-cast aluminum handle, zamak case, cover and rotor, delrin washer, stainless steel screws and grub screws, galvanized steel pin. For sash width from 80 to 100 mm
Flaps in die-cast aluminium; Screw M6 with protective coating Dacromet 320 and washer in galvanized steel, buttons in zamak, springs in hardened steel. 35.9 x 9.9 mm, with Ø 7,5 mm peg
Hinge base body and body in extruded aluminium. locking set screws in stainless steel AISI 303. Galvanized steel adjustment set screw. Zamak bushings. Derlyn Bushings Hinge caps in plastic (Nylon Pa6). 3-flap hinges with reduced wing frame, hole interaxis 22 mm, interaxis 53 mm
Flaps in die-cast aluminium; Screw M6 with protective coating Dacromet 320 and washer in galvanized steel, buttons in zamak, springs in hardened steel. 34,3 x 10,5 mm
Steel rod, zamak bracket. Maximum capacity 150kg, allows the rotation of the sash by 180°
Extended hinge suitable for use on external opening shutters and window frames. 2-flap hinge length 42 mm, with additional fixing hole. Capacity: With 2 hinges: 40 Kg With 3 hinges: 50 Kg
Sections legend
