Catalogue
Search
Die-cast aluminum handle, zamak case, cover and rotor, delrin washer, stainless steel screws and grub screws, galvanized steel pin. For sash width from 80 to 100 mm
Flaps in die-cast aluminium; Screw M6 with protective coating Dacromet 320 and washer in galvanized steel, buttons in zamak, springs in hardened steel. 35.9 x 9.9 mm, with Ø 7,5 mm peg
Hinge base body and body in extruded aluminium. locking set screws in stainless steel AISI 303. Galvanized steel adjustment set screw. Zamak bushings. Derlyn Bushings Hinge caps in plastic (Nylon Pa6). 3-flap hinges with reduced wing frame, hole interaxis 22 mm, interaxis 53 mm
Flaps in die-cast aluminium; Screw M6 with protective coating Dacromet 320 and washer in galvanized steel, buttons in zamak, springs in hardened steel. 34,3 x 10,5 mm
Extended hinge suitable for use on external opening shutters and window frames. 2-flap hinge length 42 mm, with additional fixing hole. Capacity: With 2 hinges: 40 Kg With 3 hinges: 50 Kg
Hinges in extruded aluminium and zamak, corner drive, zamak terminals and retainers, stainless steel plates and screws. Basic kit with anti false manoeuvre on the cremone bolt. Maximum capacity 100 KG
Hinges made of extruded aluminium and zamak, corner drive, terminals and retainers in zamak, plates and screws in stainless steel. Basic kit logic manoeuvre with anti-false top manoeuvre. In combination with the arms art. 3423.2X. Maximum capacity: 140 Kg.
Hinges in extruded aluminium and zamak, zamak terminals and retainers, stainless steel plates and screws. Basic kit with anti-false top maneuver. Maximum capacity: 140 Kg
Hinges in extruded aluminium and zamak, corner drive, zamak terminals and retainers, stainless steel plates and screws. Basic kit logic manoeuvre with anti-false maneuver on the cremone bolt. Maximum capacity: 140 Kg. In combination with the art. 3423.2X arms.
Hinges in extruded aluminium and zamak, corner drive, zamak terminals and retainers, stainless steel plates and screws. Basic kit with anti false manoeuvre on the cremone bolt. Maximum capacity 140 Kg. In combination with the art. 3423.2X arms.
Stainless steel levers, screws and set screws, zamak body. Arm for secondary sash. In combination with kits 3423.*
Extruded aluminium and zamak hinges, counter plates in zamak and stainless steel and screws, stainless steel screws, pins and set screws. Tilt and turn sash hinge kit. Maximum capacity 140kg. In combination with the arms art. 3423.2*.
Sections legend
