Catalogue
Search
Various materials. Smoke sensor
Zamak case and case cover; C40 turned steel pinions and pin; Stainless steel plate; Zinc-plated steel screws. 12.5 mm offset center distance. Compatible with Karma minimal handles, item 3091.*
Zamak case and case cover; C40 turned steel pinions and pins; Zinc-plated steel screws. 12.5 mm offset center distance.
Frame and sash side hinge in extruded aluminium, zamak plates, nylon bushings, screws, setscrew and pin in stainless steel. Maximum load 200 kg for casement opening.
made of zamak. Cylinder cover for internal doors
Galvanized steel screws. In combination with movement art. 3626.2. backset 30 mm.
Galvanized steel screws. In combination with movement art. 3626.2. backset 35 mm.
Flaps in die-cast aluminium; Screw M6 with protective coating Dacromet 320 and washer in galvanized steel, buttons in zamak, springs in hardened steel. 19,3 x 9,2 mm, with Ø 7,5 mm peg
Lever and rods in stainless steel, support and adjustment body in zamak. Bottom hinge for tilt&turn and casement sash. For LH-side opening. Maximum load 130 kg - 150 kg in combination with 3310.51 - 180 kg in combination with 3310.50+1211 (with limited opening 90°).
Die-cast aluminium handle, body, body cover and rotor in zamak, screws and pin in steel. Double offset handle for profile sections up to 64 mm
Extruded aluminium body; M8 screw and M6 set screw in galvanized steel. H = 16,2 mm
Stainless steel lever, pins, screw and grub screws; Zamak blocks; nylon blocks. For handle-controlled casement opening that can be installed vertically
Sections legend
