Catalogue
Search
Extruded aluminium body; M8 screw and M6 set screw in galvanized steel. H = 16,2 mm
Stainless steel lever, pins, screw and grub screws; Zamak blocks; nylon blocks. For handle-controlled casement opening that can be installed vertically
Die-cast aluminum handle; Rotor, case and cover in zamak; Derlin washer; Spring, grub screw and pin in galvanized steel; screws in stainless steel. For sash width from 40 to 60 mm
Die-cast aluminum handle; Rotor, case and cover in zamak; Derlin washer; Spring, grub screw and pin in galvanized steel; screws in stainless steel. For sash width from 60 to 80 mm
Die-cast aluminum handle; Rotor, case and cover in zamak; Derlin washer; Spring, grub screw and pin in galvanized steel; screws in stainless steel. For sash width max 90 mm
Stainless steel. Fixing kit with threaded inserts M3
Die-cast aluminum handle, zamak case, cover and rotor, delrin washer, stainless steel screws and grub screws, galvanized steel pin. For sash width from 80 to 100 mm
Flaps in die-cast aluminium; Screw M6 with protective coating Dacromet 320 and washer in galvanized steel, buttons in zamak, springs in hardened steel. 35.9 x 9.9 mm, with Ø 7,5 mm peg
Flaps in die-cast aluminium; Screw M6 with protective coating Dacromet 320 and washer in galvanized steel, buttons in zamak, springs in hardened steel. 34,3 x 10,5 mm
Extended hinge suitable for use on external opening shutters and window frames. 2-flap hinge length 42 mm, with additional fixing hole. Capacity: With 2 hinges: 40 Kg With 3 hinges: 50 Kg
Hinges in extruded aluminium and zamak, corner drive, zamak terminals and retainers, stainless steel plates and screws. Basic kit with anti false manoeuvre on the cremone bolt. Maximum capacity 100 KG
Hinges made of extruded aluminium and zamak, corner drive, terminals and retainers in zamak, plates and screws in stainless steel. Basic kit logic manoeuvre with anti-false top manoeuvre. In combination with the arms art. 3423.2X. Maximum capacity: 140 Kg.
Sections legend
