body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. For tilt and turn logic manoeuvre, LH-RH opening. Centre dist. 104 mm. Suitable for kit with anti-false manoeuvre on the cremone bolt.

Body and handle in die-cast aluminium; rack, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. For tilt before turn manoeuvre, LH-RH opening. Interaxis dist. 98 mm. Suitable for kit with anti-false manoeuvre on the cremone bolt.

Body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. With key,  Inter-axes 98 mm, for tilt-turn with anti-false manoeuvre on the cremone bolt.

body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. With key, Inter-axes 98 mm.

Body and handle in die-cast aluminium; rack, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. For tilt before turn manoeuvre, LH-RH opening. Interaxis dist. 98 mm. Suitable for kit with anti-false manoeuvre on the cremone bolt.

Die-cast aluminium handle, body, body cover and rotor in zamak, screws and pin in steel.For tilt before turn LH-RH opening. Square projection 26 mm.

body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. Low-profile body,  for tilt before turn manoeuvre, LH-RH opening. Interaxis dist. 104 mm. Suitable for kit with upper anti-false manoeuvre.

Body and handle in die-cast aluminium; rack, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. For tilt before turn manoeuvre, LH-RH opening. Interaxis dist. 104 mm. Suitable for kit with upper anti-false manoeuvre.

Die-cast aluminium handle; body, body cover and rotor made of zamak; anti-friction bushes in delrin, steel pin and screws. For tilt before turn LH-RH opening. Square projection 26 mm.

body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. Low-profile body,  for tilt before turn manoeuvre, LH-RH opening. Interaxis dist. 104 mm. Suitable for kit with anti-false manoeuvre on the cremone bolt.

Body and handle in die-cast aluminium; rack, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. For tilt before turn manoeuvre, LH-RH opening. Interaxis dist. 104 mm. Suitable for kit with anti-false manoeuvre on the cremone bolt.

Die-cast aluminium handle; body, body cover, rotor made of zamak; anti-friction bushings in delrin, steel pin and screws. Handle for tilt and slide, 7 mm square, projection 32 mm