Body and handle in die-cast aluminium; rack, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. For tilt before turn manoeuvre, LH-RH opening. Interaxis dist. 98 mm. Suitable for kit with anti-false manoeuvre on the cremone bolt.

Die-cast aluminium handle, body, body cover and rotor in zamak, screws and pin in steel.For tilt before turn LH-RH opening. Square projection 26 mm.

body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. Low-profile body,  for tilt before turn manoeuvre, LH-RH opening. Interaxis dist. 104 mm. Suitable for kit with upper anti-false manoeuvre.

Body and handle in die-cast aluminium; rack, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. For tilt before turn manoeuvre, LH-RH opening. Interaxis dist. 104 mm. Suitable for kit with upper anti-false manoeuvre.

Die-cast aluminium handle; body, body cover and rotor made of zamak; anti-friction bushes in delrin, steel pin and screws. For tilt before turn LH-RH opening. Square projection 26 mm.

body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. Low-profile body,  for tilt before turn manoeuvre, LH-RH opening. Interaxis dist. 104 mm. Suitable for kit with anti-false manoeuvre on the cremone bolt.

Body and handle in die-cast aluminium; rack, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. For tilt before turn manoeuvre, LH-RH opening. Interaxis dist. 104 mm. Suitable for kit with anti-false manoeuvre on the cremone bolt.

Die-cast aluminium handle; body, body cover, rotor made of zamak; anti-friction bushings in delrin, steel pin and screws. Handle for tilt and slide, 7 mm square, projection 32 mm

Die-cast aluminium handle, zamak rotor, derlin body, aluminium cover, steel screws and pin and zamak socket. Adjustable panel projection from 32,5 to 42 mm, fixing center distance 43 mm, RH version

Die-cast aluminium handle, nylon cap and washer, zamak bushing, set screw, stainless steel spring and pin, LH version. Adjustable panel projection from 33,5 to 43 mm. To be combined with art. 3630 - 3630.10 - 3631 - 3631.10

Die-cast aluminium handle, nylon cap and washer, zamak bushing, set screw, stainless steel spring and pin. Adjustable panel projection from 33,5 to 43 mm, RH version. To be combined with art. 3630 - 3630.10 - 3631 - 3631.10

Die-cast aluminium handle, nylon cap and washer, zamak bushing, set screw, stainless steel spring and pin, LH version. Adjustable panel projection from 23,5 to 33 mm. To be combined with art. 3630 - 3630.10 - 3631 - 3631.10