Catalogue
Search
Galvanized steel screws. In combination with movement art. 3626.2. backset 35 mm.
Levers, pins, cams, and frame angle support in stainless steel, adjustment body in zamak. Bottom hinge for tilt&turn and casement sash. For Right opening. Maximum capacity: 100 Kg - 130 Kg in combination with 3310.51. Adaptable to coplanar profiles up to a 12 mm step
Levers, pins, cams, and frame angle support in stainless steel, adjustment body in zamak. Bottom hinge for tilt&turn and casement sash. For Left opening. Maximum capacity: 100 Kg - 130 Kg in combination with 3310.51. Adaptable to coplanar profiles up to a 12 mm step
Levers, pins, cams, and frame angle support in stainless steel, adjustment body in zamak. For Right opening. Maximum capacity: 100 Kg - 130 Kg in combination with 3310.51. Adaptable to coplanar profiles up to a 12 mm step
Lever and rods in stainless steel, support and adjustment body in zamak. For Right opening. Maximum load 130 kg - 150 kg in combination with 3310.51 - 180 kg in combination with 3310.50+1211 (with limited opening 90°).
Lever and rods in stainless steel, support and adjustment body in zamak. Bottom hinge for tilt&turn and casement sash. For LH-side opening. Maximum load 130 kg - 150 kg in combination with 3310.51 - 180 kg in combination with 3310.50+1211 (with limited opening 90°).
Hinge and plate in extruded aluminum, plates frame side, pin, eccentric height regulator, screws, cams and stainless steel rains; adjustment pawl in zamak; bush and adjustment bases in nylon. Load 140 kg
Stainless steel lever, pins, screw and grub screws; Zamak blocks; nylon blocks. For handle-controlled casement opening that can be installed vertically
Die-cast aluminum handle; Rotor, case and cover in zamak; Derlin washer; Spring, grub screw and pin in galvanized steel; screws in stainless steel. For sash width from 40 to 60 mm
Die-cast aluminum handle; Rotor, case and cover in zamak; Derlin washer; Spring, grub screw and pin in galvanized steel; screws in stainless steel. For sash width from 60 to 80 mm
Die-cast aluminum handle; Rotor, case and cover in zamak; Derlin washer; Spring, grub screw and pin in galvanized steel; screws in stainless steel. For sash width max 90 mm
Sections legend
