Catalogue
Search
Steel rod, zamak bracket. Maximum capacity 150kg, allows the rotation of the sash by 180°
Zamak case and case cover; C40 turned steel pinions and pin; Stainless steel plate; Zinc-plated steel screws. 12.5 mm offset center distance. Compatible with Karma minimal handles, item 3091.*
Zamak case and case cover; C40 turned steel pinions and pins; Zinc-plated steel screws. 12.5 mm offset center distance.
made of zamak. Cylinder cover for internal doors
Galvanized steel screws. In combination with movement art. 3626.2. backset 30 mm.
Galvanized steel screws. In combination with movement art. 3626.2. backset 35 mm.
Lever and rods in stainless steel, support and adjustment body in zamak. Bottom hinge for tilt&turn and casement sash. For LH-side opening. Maximum load 130 kg - 150 kg in combination with 3310.51 - 180 kg in combination with 3310.50+1211 (with limited opening 90°).
Stainless steel lever, pins, screw and grub screws; Zamak blocks; nylon blocks. For handle-controlled casement opening that can be installed vertically
Stainless steel. Fixing kit with threaded inserts M3
Extruded aluminium and zamak hinges, counter plates and screws, arm with lever, stainless steel screws and set screws, zamak body. Secondary sash hinge kit. Maximum capacity 140 kg
Extruded aluminium and zamak hinges, counter plates and screws, arm with lever, stainless steel screws and set screws, zamak body. Secondary sash hinge kit. Maximum capacity 160kg.
Extruded aluminium and zamak hinges, counter plates and screws, arm with lever, stainless steel screws and set screws, zamak body. Hinge kit for side-by-side sash. Maximum capacity 100 kg.
Sections legend
