1.how does the logic handling kit work?

• The logic handling kit enables vasistas opening by rotating the handle of the cremone bolt at 90° and allows you to perform the swing opening by rotating the handle of the cremone bolt at 180°. Such a kit is usually required for installations in public places

2. What are the intended uses of the logic handling kit?

•  The logic handling kit is usually required for installations in public places

3. Which hinges should I buy for ween hide 180 tilt and turn leaf version?

• Once the opening side has been defined (right or left), the lower hinge 3301/02 (equal for both A/R and swing opening) and the upper hinge should be purchased. There are two different types of upper hinges available, depending on the width of the wing/leaf (from 460 to 670 short version; from 671 to 1700 long version)

4. Which hinges should I buy for ween hide 180 swing version?

• Once the opening side has been defined (right or left) the lower hinge 3301/02 (equal for both AR and swing opening) and the upper hinge for the swing system (3301/02.71) should be purchased.

5. what function does the 3301.50 support have?

• The support 3301.50 is used for wing/leaf capacity from 130 kg to 170 kg. The opening of the wing/leaf must be limited to 90°.

6. Can I use the A/R ween with internal coplanar frame?

• No. You should use smooth frame systems. In this situation, you can use the A/R 2.0

7. can I add extra locking points after the wing/leaf has been assembled

• yes, it is possible to apply the additional horizontal and vertical locks also with the frame fixed, attaching the kit transmission system to the arm (vertical closing) or to the terminal (horizontal closing)

8. is there a microventilation device provided?

• yes, by purchasing the microventilation stopper, rotating the cremone bolt at 135° the wing/leaf will be separated from the frame by a few mm necessary for microventilation

9. on 2 leaf frames, do I have the possibility to have the same hinges on the side leaf?

• Yes, by purchasing the side-by-side leaf hinge kit, in addition to being aesthetic, they have the same characteristics in terms of capacity and adjustment.

10. what latches should I buy for side-by-side leaf?

• You must purchase the Bi-Hid kits

11. how can I determine which items to buy according to the size of the leaf (Ween)?

• the technical catalogue and the brochure show the product layouts, where you can identify the list of items required according to the size of the leaf

12. how can I determine which items to buy according to the size of the leaf (Ween Hide 180)?

• the technical catalogue and the brochure show the product layouts, where you can identify the list of items required according to the size of the leaf